FLUKE 726 -

Name: Fluke FLUKE 726
Brand: Fluke

Multifunction process calibrator, FLUKE 726, Fluke

声明：图片仅供参考，请以实物为准！

订购热线： 400-900-3095 0755-21000796, QQ:800152669, Email:sales@szcwdz.com

由于产品数据库庞大，部分产品信息可能未能及时更新，下单前请与销售人员确认好实时在库数量，谢谢合作！

Instrument for

Current
Frequency
Pressure
RTD
Resistance
Thermoelements
Voltage

ADC max.	24 mA
VDC max.	30 VDC
Ohm max.	4000 Ohm
Max. temperature	+1750 °C
Min. Temperature	-200 °C
Measuring function	Current, apply/simulate Frequency, apply/simulate Pressure, apply/simulate Resistance, apply/simulate Voltage, apply/simulate
Hz max.	15 kHz
Description	Precision Multifunction Process Calibrator
Sensor type/thermocouples	J K T E R S B M L U N XK BP Cu10 Ni120 PT100 PT200 PT500 PT1000
ADC resolution	1 μA
VDC resolution	0.01 mV
Ohm resolution	0.01 Ohm
°C resolution	0.01 °C
Hz resolution	1 Hz
Display	LCD Backlit
Electrical supply	4 x LR6/AA
Dimensions L x W x H	200 x 96 x 47 mm
Weight	850 g

Measure and source volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Two separate channels; measure, source and view process signals simultaneously
Measure pressure using any of 29 Fluke 700Pxx Pressure Modules (for pressure sourcing external pump required)
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Precise measurement and calibration source performance, accuracy of 0.01% in Range 4...20 mA
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Store frequently-used test setups for later use
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
HART mode inserts 250 Ohm resistor in mA measure and source for compatibility with HART instrumentation