300-18-056,Oscilloscope 4x100 MHz 2.5 GS/s, MDO3014 + MDO3SA + MDO3BND-PROMO, Tektronix
Datasheet
| Series | MDO3000 |
| Channel analog | 4 |
| Bandwidth | 100 MHz |
| Sample rate, single-shot | 2.5 GS/s |
| Channel RF | 1 |
| Display | 9" TFT-LCD |
| Trigger |
Auto
Edge Logic Normal Pulse width Rise/Fall Time Runt Sequence (B-trigger) Setup and Hold Single Video Audio (I2S, LJ, RJ, TDM) (optional) CAN (optional) FlexRay (optional) I2C (optional) LIN (optional) MIL-STD-1553 (optional) Parallel (optional) RS-232/422/485/UART (optional) SPI (optional) USB (optional) |
| Safety standard EN 61010 | CAT II 300 V |
| Interfaces |
Ethernet (LAN)
LXI USB host (Data Storage To USB Stick) XGA |
| Type of measurement | RMS |
| Measuring function |
Automatic parameter measurement
Cursor measuring Duty cycle Min./max. value Mask testing (optional) Serial Triggering and Analysis (optional) |
| Instrument functions |
Arbitrary wavefrom generator (optional)
Digital Voltmeter (optional) Logic Analyzer (optional) Power Analysis (optional) Protocol Analyzer (optional) Spectrum Analyser |
| Rise time | 4 ns |
| Vertical sensitivity/div | 1 mV...10 V/div |
| Time basis | 1 ns...1000 s/div |
| Vertical resolution | 8 Bit |
| Electrical supply | 100...240 V @ 50...60 Hz |
| RF frequency range max. | 100 MHz |
| RF span max. | 0.1 GHz |
| RF resolution bandwith max. | 150 MHz |
| Mathematical functions |
Add
Subtract Multiply Divide Integrate Differentiate FFT Advanced Math |
| Input coupling |
AC
DC |
| Input impedance Ohm |
1
MOhm
50 MOhm 75 MOhm |
| RF frequency range min. | 9 kHz |
| RF span min. | 9 kHz |
| RF resolution bandwith min. | 20 Hz |
| Vertical Units |
dBm
dBmV dBμV dBμW dBmA dBμA |
| Dimensions L x W x H | 148 x 417 x 204 mm |
| Weight | 4.2 kg |
| Delivery with |
1 Probes/channel
BNC Adapter Documentation CD Manual Power cable Software Calibration certificate Translated front-panel overlay |
Including free MDO3SA 3 GHz spectrum analyzer upgrade option AND a free MDO3BND application software option
